Authorized Distributor · SAIL & RINL · Raipur, Chhattisgarh
Precision Rolled
MS Angles
for Fabrication
Equal angle sections for trusses, towers, sheds, machinery frames, and industrial fabrication where straightness, weight accuracy, and dimensional consistency are non-negotiable.
IS:2062 Certified
SAIL Authorized
RINL / Vizag
Straightness Guaranteed
Weighed Dispatch
Product Gallery
MS Angles — Up Close
Equal angle sections with clean edges, dimensional consistency, and mill-standard finish for fabrication and structural work.
1 / 4
Click to zoom
01
02
03
04
Product Overview
What Is an
What Is an
MS Angle?
A mild steel angle, also written as MS angle or L-section, is a hot-rolled structural steel section with two legs meeting at a 90-degree angle. When both legs are equal in length — such as 50×50 or 75×75 — it is classified as an equal angle. When the legs differ — such as 75×50 — it is an unequal angle. This page covers equal angles, which account for the majority of fabrication demand across Central India.
MS angles are manufactured from mild carbon steel billets rolled at high temperature, which gives them consistent grain structure, good weldability, and reliable dimensional tolerance. Sourced from integrated steel plants like SAIL and RINL, primary-grade angles carry full mill traceability and conform to IS:2062 Grade A structural steel specification.
Because of their L-shaped cross-section, angles offer excellent strength-to-weight ratio when used as chord members in trusses, bracing elements in towers, or support framing in sheds and mezzanines. They are easy to drill, cut, punch, and weld at site, making them the most versatile structural section in general fabrication.
IS:2062 Grade A — Key Mechanical Properties
Ultimate Tensile Strength
410 N/mm²
Yield Stress (Min.)
250 N/mm²
Elongation (Min.)
23%
Carbon (C) Max.
0.23%
Sulphur (S) Max.
0.050%
Phosphorus (P) Max.
0.050%
Silicon (Si) Max.
0.40%
Carbon Equivalent (CE)
0.42
Standard Lengths
6 m & 12 m
Size Range (Equal)
25×3 to 150×16 mm
Free Tool
Angle Weight & Load Estimator
Select section, quantity, and length to get instant weight and truck planning.
Weight per Metre
—
kg / metre
Total Weight
—
metric tons
Truck Required
—
Calculated on standard IS:808 section weights. Actual supply may vary slightly within mill tolerance.
Authorized Brands
Trusted MS Angle Supply Across Central India
We stock branded primary MS angles and dependable commercial grade supply for fabrication, towers, sheds, and industrial structures.
Grade Selection
Two Supply Tiers.
Two Supply Tiers.
Choose by Specification, Not Guesswork.
Use primary grade where test certificates and strict sourcing matter. Use commercial grade where cost efficiency matters without compromising dimensional reliability.
Primary Grade
SAIL & RINL
Vizag Steel
Vizag Steel
Integrated Steel Plants · IS:2062 Structural Quality
Best for
- Government infrastructure and PWD works
- Transmission, telecom, and lattice towers
- Heavy fabrication and machinery frames
- Projects where mill TC is mandatory
- Engineer-specified branded structural steel
"Use this where the drawing, consultant, or tender specifically asks for primary mill material."
Commercial Grade
Reputed Secondary
Rolling Mills
Rolling Mills
Dimensional consistency · Value-focused procurement
Best for
- Gates, grills, and frame fabrication
- Small sheds and mezzanine work
- Agricultural and workshop structures
- Non-certified general fabrication
- Projects where TC is not mandatory
"We avoid under-weight supply and disclose source details on request before dispatch."
Technical Reference
Complete MS Angle Weight Chart
Standard equal angle sizes per IS:808 — weight in kg/m and kg/ft for procurement and BOQ planning.
Small Sections Gates · Frames · Grills
| Section | Size (mm) | Thick. | kg/m | kg/ft | Use |
|---|---|---|---|---|---|
| MS Angle | 25 × 25 | 3mm | 1.11 | 0.34 | Grills, frames |
| MS Angle | 25 × 25 | 5mm | 1.80 | 0.55 | Light fabrication |
| MS Angle | 30 × 30 | 3mm | 1.40 | 0.43 | Light frames |
| MS Angle | 35 × 35 | 4mm | 2.10 | 0.64 | Gate frames |
| MS Angle | 35 × 35 | 5mm | 2.60 | 0.79 | Gate frames |
| MS Angle | 40 × 40 | 4mm | 2.40 | 0.73 | Small sheds |
| MS Angle | 40 × 40 | 5mm | 3.00 | 0.91 | Small sheds |
| MS Angle | 40 × 40 | 6mm | 3.50 | 1.07 | Support frames |
| MS Angle | 45 × 45 | 4mm | 2.70 | 0.82 | General fab. |
| MS Angle | 45 × 45 | 5mm | 3.40 | 1.04 | General fab. |
| MS Angle | 45 × 45 | 6mm | 4.00 | 1.22 | General fab. |
Medium Sections Trusses · Sheds · Mezzanine
| Section | Size (mm) | Thick. | kg/m | kg/ft | Use |
|---|---|---|---|---|---|
| MS Angle | 50 × 50 | 4mm | 3.00 | 0.91 | Light trusses |
| MS Angle | 50 × 50 | 5mm | 3.80 | 1.16 | Trusses, sheds |
| MS Angle | 50 × 50 | 6mm | 4.50 | 1.37 | Industrial supports |
| MS Angle | 65 × 65 | 5mm | 4.90 | 1.49 | Purlins |
| MS Angle | 65 × 65 | 6mm | 5.80 | 1.77 | Mezzanine floors |
| MS Angle | 65 × 65 | 8mm | 7.70 | 2.35 | Industrial frames |
| MS Angle | 65 × 65 | 10mm | 9.40 | 2.86 | Heavy frames |
| MS Angle | 75 × 75 | 5mm | 5.70 | 1.74 | Tower members |
| MS Angle | 75 × 75 | 6mm | 6.80 | 2.07 | Tower fabrication |
| MS Angle | 75 × 75 | 8mm | 8.90 | 2.71 | Heavy fabrication |
| MS Angle | 75 × 75 | 10mm | 11.00 | 3.35 | Machine frames |
| MS Angle | 75 × 75 | 12mm | 13.00 | 3.96 | Heavy machine frames |
Heavy Sections Towers · Infrastructure · Bridges · Primary Grade
| Section | Size (mm) | Thick. | kg/m | kg/ft | Grade | Use |
|---|---|---|---|---|---|---|
| MS Angle | 80 × 80 | 6mm | 9.60 | 2.93 | Primary | Shed columns |
| MS Angle | 90 × 90 | 6mm | 8.20 | 2.50 | Primary | Transmission towers |
| MS Angle | 90 × 90 | 7mm | 9.50 | 2.90 | Primary | Transmission towers |
| MS Angle | 90 × 90 | 8mm | 10.80 | 3.29 | Primary | Heavy towers |
| MS Angle | 90 × 90 | 10mm | 13.40 | 4.08 | Primary | Industrial frames |
| MS Angle | 100 × 100 | 6mm | 9.20 | 2.80 | Primary | Tower legs |
| MS Angle | 100 × 100 | 8mm | 12.20 | 3.72 | Primary | Tower legs |
| MS Angle | 100 × 100 | 10mm | 14.90 | 4.54 | Primary | Heavy machinery |
| MS Angle | 100 × 100 | 12mm | 17.70 | 5.39 | Primary | Very heavy frames |
| MS Angle | 110 × 110 | 8mm | 13.30 | 4.05 | Primary | Large span trusses |
| MS Angle | 110 × 110 | 10mm | 17.30 | 5.27 | Primary | Large span trusses |
| MS Angle | 110 × 110 | 12mm | 20.80 | 6.34 | Primary | Large span trusses |
| MS Angle | 130 × 130 | 10mm | 19.70 | 6.00 | Primary | Large span trusses |
| MS Angle | 130 × 130 | 12mm | 23.20 | 7.07 | Primary | Bridge structures |
| MS Angle | 150 × 150 | 12mm | 27.30 | 8.32 | Primary | Major bridges |
| MS Angle | 150 × 150 | 16mm | 35.80 | 10.91 | Primary | Major infrastructure |
Standard lengths: 6 metres and 12 metres · Custom cutting available on request · Minimum order may apply for non-stock sizes
IS:808 / IS:1852 Reference
Rolling Tolerances & Chemical Composition
Permissible deviations for equal angle sections as per Indian Standards.
Dimensional Tolerances IS:1852
| Parameter | Tolerance |
|---|---|
| Leg length up to 45mm | ± 1.5 mm |
| Leg length 45 to 100mm | ± 2.0 mm |
| Leg length above 100mm | ± 2% |
| Sectional weight — 3mm thick | ± 5% |
| Sectional weight — over 3mm | +5% / −3% |
| Fixed length supply | + 100 mm |
| Straightness | 1 mm per metre |
| Root radius (r₁) | Per IS:808 table |
Chemical Composition IS:2062 Grade A
| Element | Max. % (Grade A) |
|---|---|
| Carbon (C) | 0.23 |
| Manganese (Mn) | 1.50 |
| Sulphur (S) | 0.050 |
| Phosphorus (P) | 0.050 |
| Silicon (Si) | 0.40 |
| Carbon Equivalent (CE) | 0.42 |
Why Choose Us
Why Fabricators in Central India Buy from Us
Not just supply. Controlled sourcing, checked loading, and practical support for working buyers.
Straightness Checked
Bent and twisted angles slow cutting, fitting, and welding. We visually inspect bundles before dispatch so fabrication losses don't become your site problem.
Correct Weight Supply
Under-weight angles quietly destroy project value. We weigh what we sell and keep dispatch aligned with actual material weight, not just printed tags.
Mill TC Available
For SAIL and RINL material, test certificates with source traceability are available for projects that need quality documentation and audit support.
Standard & Cut Lengths
We support both stock lengths and project-based cut requirements where quantity justifies processing — useful for tower panels, trusses, and repetitive fabrication jobs.
Single Vendor Advantage
Need angles, channels, beams, TMT, and pipes together? We consolidate supply on one bill and one dispatch plan, reducing coordination friction.
Source Transparency
For commercial grade supply, we disclose source details on request — helping buyers avoid scrap-based, light-weight, inconsistent secondary material.
Application Guide
What Gets Built with MS Angles
Transmission Towers
Primary Grade
75×6 to 130×12mm
Industrial Shed Purlins
Primary / Commercial
50×6, 65×6mm
Gates & Grills
Commercial
25×3, 35×5, 40×5mm
Mezzanine Floors
Primary / Commercial
65×6, 75×6mm
Agricultural Structures
Commercial
40×5, 50×5mm
Railway Structures
Primary
90×6, 100×8mm
Staircase Frames
Primary / Commercial
75×6, 75×8mm
Bridges & Flyovers
Primary
100×10, 130×12mm
Solar Mounting Frames
Commercial
40×5, 50×5, 50×6mm
Telecom Towers
Primary
75×8, 90×8mm
Machine Frames
Primary / Commercial
75×10, 100×8mm
Residential Roof Trusses
Commercial
50×5, 65×6mm
Common Questions
FAQ — From Fabricators
What is the difference between equal and unequal angles? ▾
Equal angles have both legs the same size — for example 50×50 or 75×75. Unequal angles have legs of different lengths, such as 75×50 or 45×30. This page covers equal angle sections, which represent the majority of fabrication demand for trusses, towers, sheds, and frames.
What does IS:2062 Grade A mean for MS Angles? ▾
IS:2062 is the Indian Standard for hot-rolled low, medium, and high tensile structural steel. Grade A specifies a minimum yield stress of 250 N/mm², ultimate tensile strength of 410 N/mm², and minimum elongation of 23%. Carbon is limited to 0.23%, sulphur and phosphorus to 0.05% each, keeping the steel weldable and ductile for structural fabrication.
Do you bill by weight or by piece? ▾
We bill by actual weight. For fabrication buyers this matters significantly — under-weight material is one of the most common and costliest issues in the angle market. Our dispatch is weighed and the bill reflects actual material delivered.
Is MS Angle easy to weld, drill, and cut? ▾
Yes. MS Angles conforming to IS:2062 have a low carbon equivalent (0.42 max.), which makes them readily weldable with standard arc and MIG processes. They are drillable and punchable in standard shop equipment, and can be cold-bent or flame-cut without special precautions. This versatility is why they are the default choice for trusses, sheds, towers, gates, and support structures.
Do you provide mill test certificates (TC)? ▾
Yes — for SAIL and RINL / Vizag primary material. Mill test certificates confirm heat number, chemical composition, and mechanical test results. If your project requires branded source compliance, mention this at enquiry stage so we align the supply accordingly from the start.
What lengths do you stock? ▾
Standard supply is in 6 metre and 12 metre lengths, depending on section size and source availability. Custom cutting can be discussed for bulk orders — particularly useful for tower panels, repetitive truss members, and pre-cut fabrication jobs.
Can you supply both primary and commercial grade? ▾
Yes. We handle primary branded material (SAIL, RINL) where specification and audit trails matter, and commercial grade from reputed secondary mills for cost-sensitive projects where dimensional consistency matters but a TC is not mandatory. The right choice depends on your project requirement, drawing specification, and budget.
What is the standard tolerance on MS Angle leg length and weight? ▾
Per IS:1852: leg length tolerance is ±1.5mm for sections up to 45mm, ±2.0mm for 45–100mm, and ±2% above 100mm. Sectional weight tolerance is ±5% for 3mm thickness and +5%/−3% for thicker sections. Fixed-length supply carries a +100mm tolerance. Straightness is controlled to 1mm per metre.
Bulk Procurement
Need a
Need a
Bulk
Angle Quote?
Send your BOQ or size list and we'll help you estimate the right sections, source type, and dispatch plan for your job.
500+
Projects supplied
2 hrs
Rate turnaround
100%
Checked dispatch
Chat for Bulk Order
Get a fast estimate with size-wise guidance
- Share BOQ or size list directly on WhatsApp
- Primary or commercial grade guidance included
- Weight and dispatch planning support
- Mill TC available for branded primary supply
Available Mon–Sat · 9 AM to 6 PM IST