MS Angles (IS:2062) — Vishwageeta Ispat | SAIL & RINL Authorized Distributor · Raipur

Authorized Distributor · SAIL & RINL · Raipur, Chhattisgarh

Precision Rolled
MS Angles
for Fabrication

Equal angle sections for trusses, towers, sheds, machinery frames, and industrial fabrication where straightness, weight accuracy, and dimensional consistency are non-negotiable.

IS:2062 Certified SAIL Authorized RINL / Vizag Straightness Guaranteed Weighed Dispatch

Product Gallery

MS Angles — Up Close

Equal angle sections with clean edges, dimensional consistency, and mill-standard finish for fabrication and structural work.

MS Angle product image 1 — Vishwageeta Ispat

1 / 4

Click to zoom

Free Tool

Angle Weight & Load Estimator

Select section, quantity, and length to get instant weight and truck planning.

Section Size

Number of Lengths

Length per Piece

Weight per Metre

—

kg / metre

Total Weight

—

metric tons

Truck Required

—

Calculated on standard section weights. Actual supply may vary slightly within mill tolerance.

Supply Options

Stocked for Fabricators, Contractors & Tower Buyers

Primary mill sections and reliable commercial grade supply, backed by weight checks and source transparency.

Grade Selection

Two Supply Tiers.
Choose by Specification, Not Guesswork.

Use primary grade where test certificates and strict sourcing matter. Use commercial grade where cost efficiency matters without compromising dimensional reliability.

Primary Grade

SAIL & RINL
Vizag Steel

Integrated Steel Plants · IS:2062 Structural Quality

Best for

Government infrastructure and PWD works
Transmission, telecom, and lattice towers
Heavy fabrication and machinery frames
Projects where mill TC is mandatory
Engineer-specified branded structural steel

“Use this where the drawing, consultant, or tender specifically asks for primary mill material.”

Commercial Grade

Reputed Secondary
Rolling Mills

Dimensional consistency · Value-focused procurement

Best for

Gates, grills, and frame fabrication
Small sheds and mezzanine work
Agricultural and workshop structures
Non-certified general fabrication
Projects where TC is not mandatory

“We avoid under-weight supply and disclose source details on request before dispatch.”

Technical Reference

Size & Weight Reference Chart

Common equal angle sizes used in fabrication, sheds, towers, and industrial structures.

Small Sections Gates · Frames · Grills

Title	Size	Thickness	Wt (kg/m)	Use
MS Angle	25 × 25	3mm	1.11	Grills, frames
MS Angle	25 × 25	5mm	1.77	Light fabrication
MS Angle	35 × 35	5mm	2.60	Gate frames
MS Angle	40 × 40	5mm	2.97	Small sheds
MS Angle	40 × 40	6mm	3.52	Support frames

Medium Sections Trusses · Sheds · Mezzanine

Title	Size	Thickness	Wt (kg/m)	Use
MS Angle	50 × 50	5mm	3.77	Trusses, sheds
MS Angle	50 × 50	6mm	4.47	Industrial supports
MS Angle	65 × 65	6mm	5.86	Mezzanine floors
MS Angle	75 × 75	6mm	6.84	Tower fabrication
MS Angle	75 × 75	8mm	8.98	Heavy fabrication
MS Angle	75 × 75	10mm	11.00	Machine frames

Heavy Sections Towers · Infrastructure · Bridges

Title	Size	Thickness	Wt (kg/m)	Grade	Use
MS Angle	90 × 90	6mm	8.30	Primary	Transmission towers
MS Angle	100 × 100	8mm	12.20	Primary	Tower legs
MS Angle	100 × 100	10mm	15.10	Primary	Heavy machinery
MS Angle	130 × 130	10mm	19.70	Primary	Large span trusses
MS Angle	130 × 130	12mm	23.50	Primary	Bridge structures

Standard lengths: 6 metres and 12 metres · Custom cutting available on request · Minimum order may apply for non-stock sizes

Why Choose Us

Why Fabricators in Central India Buy from Us

Not just supply. Controlled sourcing, checked loading, and practical support for working buyers.

📏

Straightness Checked

Bent and twisted angles slow cutting, fitting, and welding. We visually inspect bundles before dispatch so fabrication losses don’t become your site problem.

⚖️

Correct Weight Supply

Under-weight angles quietly destroy project value. We weigh what we sell and keep dispatch aligned with actual material weight, not just printed tags.

📋

Mill TC Available

For SAIL and RINL material, test certificates with source traceability are available for projects that need quality documentation and audit support.

✂️

Standard & Cut Lengths

We support both stock lengths and project-based cut requirements where quantity justifies processing. Useful for tower panels, trusses, and repetitive fabrication jobs.

🏭

Single Vendor Advantage

Need angles, channels, beams, TMT, and pipes together? We can consolidate supply on one bill and one dispatch plan, reducing coordination friction.

🔍

Source Transparency

For commercial grade supply, we disclose source details on request. That helps buyers avoid scrap-based, light-weight, inconsistent secondary material.

🗼

Transmission Towers

Primary Grade

75×6 to 130×12mm

🏭

Industrial Shed Purlins

Primary / Commercial

50×6, 65×6mm

🚪

Gates & Grills

Commercial

25×3, 35×5, 40×5mm

🏗️

Mezzanine Floors

Primary / Commercial

65×6, 75×6mm

🌾

Agricultural Structures

Commercial

40×5, 50×5mm

🚂

Railway Structures

Primary

90×6, 100×8mm

🪜

Staircase Frames

Primary / Commercial

75×6, 75×8mm

🌉

Bridges & Flyovers

Primary

100×10, 130×12mm

Common Questions

FAQ — From Fabricators

What is the difference between equal and unequal angles? ▾

Equal angles have both legs the same size, like 50×50. Unequal angles have different legs, like 75×50. This page is focused on equal angle sections, which cover most fabrication demand.

Do you bill by weight or by piece? ▾

We bill by actual weight. For fabrication buyers, this matters because under-weight material is one of the biggest losses in the angle market.

Is MS Angle weldable and easy to drill? ▾

Yes. MS Angles used for general fabrication are weldable, drillable, and punchable using standard shop processes. They are widely used for frames, trusses, towers, and support structures.

Do you provide mill test certificates? ▾

Yes, for SAIL and RINL / Vizag primary material. If your project needs branded source compliance, mention it at enquiry stage so the supply is aligned from the start.

What lengths do you stock? ▾

Standard supply is usually in 6 metre and 12 metre lengths, subject to section size and source. Custom cutting can be discussed for bulk jobs.

Can you supply both primary and commercial grade? ▾

Yes. We handle primary branded material where specification matters, and commercial grade where practical budget supply matters. The right choice depends on your project, audit need, and drawing specification.

Bulk Procurement